Groverhaus (import from thingiverse)

Original Text from thingiverse:

In 2006, a man on Something Awful using the handle "Grover" decided to design and build his own home addition despite having no real experience in doing that. Grover's adventure became infamous, and the fruits that resulted from it can now be printed in the load-bearing filament of your choice.

Note: This thing is the Grover-designed addition only. It does not include the rest of the original house.

Print Settings

• Printer brand:

Creality

• Printer:

Ender 3 Pro

• Rafts:

No

• Supports:

No

• Resolution:

No bigger than 0.3 mm nozzle. Layer height ideally 0.12 or 0.16 mm.

• Infill:

15-20%

• Filament brand:

Hatchbox

• Filament color:

White

• Filament material:

PLA

• Notes:

Supports are not needed, though there have been challenges in getting the 2nd floor off to a clean start without hanging filament inside, especially in the garage area. If your printer's prone to warping plastic, this may be an issue when printing the roof.

How I Designed This

Making Groverhaus Miniature

Information on Groverhaus is difficult to find. This started as a project to make the house for the game Cities: Skylines, which I was able to collect a limited amount of reference material for.

Once that was done, I tried a small 3D print of it. Afterward, I found much more reference material and decided to make an interior and print it at a larger scale. This is the result.