January 10, 2026
Description
These inserts are made to be used with my Swappable Stamp model
Printing information:
Use a flexible material like TPU
Print in the same orientation as the insert came (on its flat round base)
No supports are needed
Ironing (with the 3d printer) the highest surface will improve the finish of the stamp and will therefore improve the stamped results, alternatively you can also sand the model down with a high grid sandpaper (220p works well) afterwards.
Note that would you wish to make your own insert, check out the blank insert in the base model that was made for this purpose. You can also suggest it in the comments and I might add it to these inserts.
---
To store the insert packs for the Swappable Stamp (like this one), I made this storage solution:
https://www.printables.com/model/1543876-swappable-stamp-storage-tubes-fusion360
As this pack contains 10 inserts, you will need the ss_insert_storage_10 in the "Inserts only tubes" directory.
---
For more info about the stamp please check out the base model.
Most of the SVGs were found on SVGRepo: Target,Pirate Mark, Eye, Heart (was modified), Arrow, Skull, Drop ans Star
Others can be foud here: Python and Kilroy was here (was modified)
License:
Creative Commons — Attribution
8
mosselini1
