Magnetic Keychain Quick Disconnects (Two Sizes)

Magnetic Keychain Quick Disconnects in two sizes, small (3x6mm magnets) and large (3x8mm magnets).

The magnets press into the pieces but you'll still need to super glue them in, especially the side that protrudes out (modeling it this way creates a very secure connection into the recess of the other side). NOTE: I haven't printed the large size to test it yet, only the small since I don't have any 8mm magnets, so let me know if it works as good as the small size does. 

PRINT SETTINGS:

Any hard filament should be fine

.2 layer height

Print extra slow, like 40 or 50mms to provide maximum layer adhesion

Supports aren't necessary but I use them for extra bed adhesion since the parts are so small

If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ