May 12, 2025
Description
This is a minimalistic Stick on Laptop feet.
This stays on the laptop all the time and folds away to carry.
Some assembly is required. You would need to use a 2mm dia(approx.) wire to make the hinge. I use bicycle spoke wire as hinges. Also some 3M double sided foam tape to fix the stand to the bottom of the laptop.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Doesn't Matter
Supports:
No
0.2mm
Infill:
30%
Notes:
Make the number of top and bottom layers >=0.8mm.
Make number of walls to be 6 for extra strength. (also results in printing the hinge parts as solids)
Assembly
Drill through the hinge holes with the foot and base assembled.
TIP: Use the same wire you plan to use as the hinge, on the drill machine to make a snug fit.
Cut the hinge wire approximately 1mm shorted so that no metal sticks out.
I use spare bicycle spokes as hinge wire.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
bampi2k
