DJI O4 Lite camera Guard

This is a minimalistic (2gms in weight) guard bracket that is used along with the camera adaptor provided by DJI. Clips on to the DJI camera adaptor.

This solves 2 problems.

1. Secure the camera connector from coming loose.
2. Add strain relief to the cable itself by securing it to the frame

The width of the camera remains at the 14mm, originally in the camera adaptor from DJI.

This does NOT provide any protection from dirt or water. For a full case see: https://www.thingiverse.com/thing:7035689

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

Doesn't Matter

Supports:

**Resolution:**

0.1mm

Infill:

Notes:

4 perimeters, 4 top layers, 4 bottom layers. Print on the side so that the layers run the length of the part.

Category: R/C Vehicles