Xenomorph Orbiter Eddy Duo Back Cover

The current Eddy back cover is for the non Duo version. The Duo version has a switch to go in between modes. I just opened the hole up a bit to account for the switch, and the smaller chip that is also further down the board.

I have not tried it, but it should also work if you would like to put a heatsink there. The chip is smaller on the Duo, but it should still work.

I printed this in PPS-CF because I'm experimenting with different filaments at the moment, but the usual ABS/ASA would work just fine. Printed on a Bambu X1E, but building a highly modified Sovol SV-08 that this will go in.

Made in TinkerCAD.

Cheers and happy printing!