Another doorstop

One doorstop more

There are nearly infinite different models of doorstops to find. Anyway, after I tried some designs unsuccesful I ended with designing my own. Works great for my doors.

Sizes

2 different sizes published, one for doors with at least 3 mm gap, the other one for 8 mm.
Take the next bigger size when the door is at the radius (see pic with the black doorstop).

Printing

PETG (~ 15 g) recommended (PLA will do it too), Nozzle 0,4 mm or 0.6 mm (2 wall loops), no Brim, no Support.

Usage

No joke ;-D 
Place the door stopper on the floor, close the door until the door stopper is a few mm in the gap. Then fix the door stopper with your foot and push the door further onto the stopper with a little force. This raises the door slightly in the door hinges and the resulting pressure and friction force holds the door securely.

-------------------------------
The only reward for a hobbyist is likes.

Support / Donation for my work