Small Valentine Lamp

Want to have a romantic setting for Valentine?

Print the support twice and the base once.
Install the supports in the holes of the base and put a small led candle (or any led) in the space in the middle. (Do not put a real candle, it will get hot and melt.)
Slide one pannel curve print on each side and turn on the led candle. Then put the top part and there you go! You can even glue the parts together, but they should be tight enough. Do not glue the top if you want to turn the led on and off.
 

And you can even turn it around if you prefer the other view. You have two choses of top, one without hearts, and one with hearts. Or you don't have to print the top part, it's up to you.

Print instructions

Print the support upside down and make it solid on top (the former bottom, the part that will go into the base), at least 20 layers. Don't forget to print 2 supports.
Fill both part 20%.

Suggestion: make the holder in a dark colour, it will make the hearts pop more. Or a pink colour to go for Valentine. The panel should be better in white or a pale colour.

Support: 1h15 (for both of them)
Base: 1h30