Highlights:
- Noise Reduction
- Improved Stability.
- Reduces VFA & Ringing/Ghosting.
- 6 Support Points without increasing operational footprint.
BOM:
- Print 6x Foot & 6x M6 Slot Nuts
- 6x Squash Balls (double yellow dot)
- 5x M6 x 12mm Bolts
- 5x M6 T-Nuts
Print instructions
- .25 layer
- 3+ perimeters
- ±30% infill
- Minimal Support ( set overhang threshold to 5º, so supports is added only to critical areas)
- PLA / PETG
License:
Creative Commons — Attribution — Noncommercial — Share Alike
erickson85
