Tensegrity table, separate chains, no support, no screws, no glue

I loved the original print in place.  Try it.  But this one is fun also.

If printed at the supplied size, use layer thickness of 0.2 mm, especially for the chains.

You will need 4 of the long chains.

One short chain,

Print the platform and a mirror image of the platform.  It is important that it is mirrored because the original has a right-hand thread, and the mirrored platform will have a left-hand thread.

I printed successfully in PLA and silk PLA. The item in the picture is two color gold and purple silk PLA filament.