Mr. Bobo (Character)

This is a 3D model of the Character ‘Mr. Bobo’ from the YouTube channel ‘Learn with Mr. Bobo’ which can be found here: https://www.youtube.com/@mrbobosongs

The character was originally designed by my wife and I re-created the character as close to the original as possible with the help of MakerWorld and Tinkercad, and added a base with plaque to help keep him upright without falling over.

Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

I have included colour pictures to help, in case you wish to paint the figure.

I have also added an obj file which when imported to a Bambu Lab printer, should seperate the colours, so it can be printed using multiple filament colours. Please note: I do not have a Bambu Lab printer, so therefore cannot test if this works in multiple colours or not (Please let me know if it is possible or not if you try it in multi colour). The obj file is much bigger than the stl file and the model is also more detailed, but comes with no base.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I (have not) printed these on my Ankermake M5 printer with Ankermake slicer Studio (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2 or 0.1 for better detail

Nozzle: 0.4mm

Print Speed: 250mm/s (Initial layer @ 50mm/s) or slower for better detail

Nozzle Temperature: 230 Degrees (Initial layer @ 230 Degrees) 

Bed Temperature: 65 Degrees (Initial layer @ 75 Degrees)

Infill: 20%

Supports: Yes - (for hands - Tree supports from buildplate is best)

Skirt: No / Optional

Brim: No / Optional

Raft: No / Optional

Enjoy.

                                              https://www.buymeacoffee.com/tigertone