Haze plant vent

Upload the universal gcode on an SD card and insert it in any printer. Launch the gcode from the printer interface, ignore warnings and proceed. Adjust temperature and fan speed once the print starts to fit your filament needs

Printer requirements for the gcodes: preferably 0.6mm nozzle and at least  180x180mm buildplate

---

Haze Fits any 120mm PC fan

Cut the fan frame with pliers and attach it mid-print with thick double sided adhesive tape.

If you choose a USB fan, you can add a "usb fan speed controller" (Google it) to adjust and increase USB fan speed.

---

Orca slicer / Bambu Studio Settings:

Global:

layer height: 0.3mm
line width sparse infill: 1.3
walls: 0
tops: 0
bottoms: 0
infill density: 25%
infill pattern: Grid
maximum length of sparse infill anchor: 0
infill/wall overlap: 100%
detect narrow internal infill: no
infill speed: 50mm/s
reduce infill retraction: no
 

Haze 2

walls: 2
tops : 12
Filament:

retraction length: 3mm
z hop when retract: 1.2mm
z hop type: slope
wipe while retracting: yes
wipe distance: 3mm
retract amount before wipe: 66%

Insert pause at layer 135 by right-clicking on the vertical bar after slicing in Bambu Studio

In the gcodes, pause for fan insertion is inserted as follows (uncomment/comment to change for Prusa or Bambulab pause commands):

; Z_HEIGHT: 40.5
; layer num/total_layer_count: 135/570

;M400 U1 ; Bambulab pause
;M601 ; Prusa Pause

; Generic pause:
G0 X150.000 Y200.000 Z150.000 ; move away from the part
M18 S0 ; disable stepper inactivity timeout
M25 ; pause print
G0 X150.000 Y2000.000 Z151.000 ; buffer lines: some printers pause a few lines below M25
G0 X150.000 Y2000.000 Z152.000
G0 X150.000 Y2000.000 Z153.000
G0 X150.000 Y2000.000 Z154.000
G0 X150.000 Y2000.000 Z155.000
; Generic pause end

License Public Domain:
https://creativecommons.org/public-domain/cc0/