Hybrid Coaster - Iron Gwazi

This extension serves as a themed add-on for the 1:15 scale Hybrid Coaster base model by @3DPrintedRollerCoasters

As of 5/18/2025, Iron Gwazi is the only RMC coaster I've been on, so I decided to remix this Hybrid Coaster model I found and make it my own!

Instructions: (message me or comment for any clarifications or questions)

1. Print the parts in the colors directed in the “Files” section, note parts that say “supports needed”
2. Glue IG_BenchLeft and IG_BenchRight to IG_BenchSeat
3. Print and assemble according to the instructions for Hybrid Coaster, using the part made in step 2 in place of BenchSeat_A
4. Glue IG_FrontBase to the pin on the front of the front car
5. Paint the details on the crocodile head OR use the MMU model and paint the smaller details
6. Glue IG_Head to the pin on IG_FrontBase
7. Glue the IG_…_Panel parts to their respective points on IG_BenchLeft and IG_BenchRight
8. Print the track of your choice from 3D.Printed.Roller.Coasters' page with purple rails
9. Slide the train onto your track and enjoy

Note that some hardware is required to make 3D.Printed.Roller.Coasters' Hybrid Coaster model, and glue will be needed for both mine and theirs. 

Happy Printing!

The Busch Gardens Tampa Bay and Iron Gwazi logos are the trademark and property of United Parks & Resorts