RC Ramp Monster Truck – Grave Digger Jump (Remix)

Printing & Assembly instructions 

Print the Ramp on its side, I also recommend printing with an Inner Brim 3mm if you are concerned about low bed adhesion.  I printed at layer hight of .35 for speed and 10%   Rectilinear infill two Perimeters three Top & Bottom Solid layers.

Filament:

Sunlu PLA+ Green. 

If you have any questions, please feel free to contact me & please share your makes.

Big thankyou to @CaptMerciles_2092366 for the orginal design.