Pickguard for VALYRIAN EURO lock picking set

This is a removable pickguard designed for the VALYRIAN EURO lock picking set.

*Both parts are meant to be glued with a generic all-purpose flexible glue (I used the one from UHU, which works fantastically).

Once the pick reaches the bottom of the guard, there is nearly zero slack between the pick and the pickguard. 

The design works by introducing the pick into the slot. Once the pick reaches the bottom, the lever latches the pick inside the pickguard. To exchange pics, press the latching lever to release the pick.

*Tight tolerances in the design; I strongly suggest a well-calibrated printer for this job. My recommendation for a general-purpose printer calibration guide.

☕ Like this model? Support me on Buy Me a Coffee!