May 19, 2025
Description
No MMU/AMS required, only a single colour swap which can be done manually!
To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just quickly go over the model with a lighter or hot air gun.
Diameter: 100 mm.
0.08 layer height and 100% infill strongly recommended!
For BambuLabs printers, the 3mf contains an AMS swap, in all other cases:
All my coasters use the same height swap, so you can easily print multiple on the same plate and only swap once!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Yandalf
