![[HW-132 Case] - USB Step Up Power Supply Module / Voltage Regulator 3D Printer File Image 1](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/130325/images/1249148_bf9b545b-111e-4fea-89a7-91518df96a1e/foto2.jpg&w=828&h=828&output=webp&q=100&n=40 "[HW-132 Case] - USB Step Up Power Supply Module / Voltage Regulator 3D Printer File Image 1")
![[HW-132 Case] - USB Step Up Power Supply Module / Voltage Regulator 3D Printer File Image 2](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/130325/images/1249149_085dd9f2-4093-4b75-abf3-992e282075da/foto1.jpg&w=828&h=828&output=webp&q=100&n=40 "[HW-132 Case] - USB Step Up Power Supply Module / Voltage Regulator 3D Printer File Image 2")
February 6, 2022
Description
Two versions are available: with and without screws. The body is made up of two halves, which hold together quite well due to friction - using the screws is recommended, though. Screws required:
2× M2 hex 6 mm (or a bit shorter) (front - near the USB)
2× M2 hex 8 mm (or a bit shorter) (back - near the output)
In case you don't have these screws, print the screwless version! The original product can be purchased here:
Following settings were used to print this file:
Original Prusa MK1
PETG white prusament
0.2 layer height
30-60% speed
240°C/90°C
No supports
No special settings
Note: One of the pieces needs to be rotated 180° to lie on the flat side
If you find this print useful, please share your results with me :)
License:
Creative Commons — Attribution
9
Dejv311
