SliX Shotshell Checker Sizer Combo Vice

This turns the SliX Shotshell Checker Sizer Combo into a table or cart mounted vice to easily add to a SASS legal taper crip to your shells.  Much easier than doing it by hand.

As shown, printed in PETG-CF for longevity, test prints in PLA seemed to work fine but I don't know how long it will stand up.

I used this push-pull toggle clamp: https://www.amazon.com/dp/B07214XRR1?ref=ppx_yo2ov_dt_b_fed_asin_title

SliX Shotshell Checker Sizer Combo can be found here:  https://www.slixprings.com/proddetail.php?prod=SliX-Shotshell-Checker-Sizer-Combo

Simply both the shell holder on the end with the included bolt and nut, then install you checker/sizer into the die holder and line up to screw both down to the surface you want to use.

The die holder requires supports.

Note:  tolerances are intentionally tight as this takes a fair amount of pressure.  Depending on your printer you may have to scale a bit to make things fit.