40cm fullsize 3in1 Latern - (for wallmount, hanging or standalone) - use LED-Lamp only

This garden light can be used as a floor, wall, or hanging light. 

It is approximately 40 cm high, making it a full-size fixture. It is prepared for an E27 socket. Please use only LED bulbs (otherwise, excessive heat generation is expected).

The material is PETG. The files include a template for the discs, as well as printable discs for transparent PETG. The template is slightly smaller and is designed to create truly transparent discs from 2 mm polyacrylic from a hardware store using a cutting disc, which greatly enhances the lamp's appearance.

PVC-U/Tangit and screws M3.5 x 8mm are required.

The garden light is designed for a 25 mm standpipe too.

Material: PETG

10 Steps to build

Tip: When inserting the discs, first insert the disc into the lower guide, bend the disc slightly and press it into the upper guide

 Pull the cables through the openings before gluing!

_

______________________________________________________________________________________________________________

For example, you can find suitable lamps for 12V AC/DC here:

https://www.ebay.de/itm/315749007693?var=614174638533

For example, you can find suitable E27-lamp holder here:

https://www.ebay.de/itm/133892298619?_skw=baustellenfassung+e27&itmmeta=01JWK22K6TJZAKKQPWFB0EF02K&hash=item1f2c9a577b%3Ag%3AB1oAAOSw6yJm8oKF&var=433341062261

For example, you can find suitable screws here:

https://www.ebay.de/itm/261203482741?var=566918263822

_______________________________________________________________________________________________________________

Printing tips

1. Use brim and tree for all parts. 

2. Place the supports diagonally on the plate (see picture below).

3. When printing, use printing-glue for all parts – for example, I use Dimafix spray glue.

4. Currently printing PETG slowly