Clothes Hanger Marking Plate

In the office we all have the same jacket an it often happens that I could not quickly find mine and took someone elses jacket and realized its the wrong size.

So I decided to create a small marking plate with editable names that can be clipped onto the clothes hanger hook, so that everybody can clearly see which jacket is his/hers.

Hooks with diameters between 2.8mm to 3.8mm can be used without problems, larger ones may break the locating ribs on the back of the plate, as I designed that for the largest hooks that I could find and these were 3.8mm in diameter.

I printed the plate in PLA tough (or PLA+) and the clip in PP (do not use a too stiff material for the clips, it will then be quite hard to get these onto the plate or you might even break it). If you do not want to mess around with printing PP or you think its too expensive you might get away with using harder TPU, ABS or ASA as well.