April 13, 2023
Description
..:: 3D Printed Standoff for cable management with zip ties ::..
Needed some standoffs for a project so designed this. Wanted something minimal and able to drive a screw into plywood to route cables for some equipment.
Screws used were self-tapping sheet metal screws, #6 x 1/2" Pan head Phillips screws.
Let me know how it works for you!
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
.25
Filament:
PLA PLA
Notes:
There is x2 versions: 90deg and flat. Both print in the same amount of time for my printer/slicer setup.
I used the flat version.License:
Creative Commons — Attribution
8
McTech3D
