Fry Cutter Handle Guard

This was designed for the New Star Foodservice 43204 Commercial Grade French Fry Cutter, however, it looks like other brands have similar designs and this might work for those.

Printing 

Material 

Test Print: PLA - for lower cost than testing with TPU. Print this if you have a different fry cutter model or if you just want a sanity check before using your TPU.

Final Print: TPU - the handle will flex this model when installed.

Print orientation  

Print vertically when printing in TPU to counter the lower ability to bridge with TPU.

Assembly

Unbolt the handle connector, slip the handle through the bridged/connected portion of the print, and then thread the guard on with the bolt and nut of the fry cutter.