MILWAUKEE RIVET CONTAINER-REVISED

Its my second rivet ends box model for a Milwaukee M12 riveter.

You can find my first model there:
https://www.printables.com/model/1064723-milwaukee-rivets-container

After a bit of testing with the previous model and a harsh beating that previous design got from my coworkers that had no mercy while using them I have decided to create this one. It should be more sturdy, I have replaced slide in cap with threaded one so it will not be so prone to breaking. (that was the most common issue with my previous model). 

I recommend printing it with at least PETG but if it is for home use PLA should be fine too. I have printed mine with ABS and It seems to be really sturdy. ( I will find out after testing it for a longer period of time)

0.2 Layer height be fine I have tested it. For higher layer height I would recommend using variable layer height with lower values for the thread and slope.

I have used 15% gyroid infill

Print orientation on the last picture (I have used brims as I was printing with ABS but those may not be needed when printing with PLA)

Post a make after printing and let me know if there is something to fix, fell free to remix ;)