May 25, 2025
Description
An SSD Tray for the Crucial X9 Pro. Can also potentially be scaled in-slicer to fit other drives.
Pretty simple, attach it to the bottom of a laptop stand using two thin strips of nanotape or a line of hot glue on each side. Combine with a short USB-C cable and you have a tidy setup for your external SSD.
Print with the flat end to the build plate and the rounded end on top. Tree supports work well for getting a clean bridge but you may be able to get good results without. Install with the rounded end facing outwards for aesthetics.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Sascha Uncia
