Voron 2020 extrusion corner frame brace stiffener — three design variants

I created three custom corner frame brace stiffener designs for the Voron 2.4 (and other printers using 2020 extrusion), since I couldn’t find correctly sized braces.

• Corner brace 35mm brace → rear wall, print 4×

• Corner brace 35mm brace+Z-stop → upper sides, print 4× total (2L + 2R, mirrored in slicer)

• Corner brace 35mm nobraceFH → front, print 4×

All parts measure 35×35×20 mm, are designed for M5×8 BHCS screws, and should be printed at 100% infill. Please check for collisions manually before use.

These designs were inspired by this model, but the drawings were created entirely from scratch; 

https://www.printables.com/model/598461-voron-24-top-corner-brace