Round Bed Scraper

A round bed scraper with a replaceable blade. Great for popping off thin prints like purge lines without messing up your nails. If you like, you can apply fuzzy skin to achieve a gorgeous texture like the one shown in the cover image.

Print Settings Grip Parts:

• Material: PLA
• Nozzle: 0.4mm
• Layer height: 0.20mm
• Supports: no
• Perimeters: 2
• Fuzzy Skin: yes (optional, You don't necessarily need to use fuzzy skin.)

Print Settings Blade:

• Material: PLA
• Print Sheet: Smooth PEI
• Nozzle: 0.4mm
• Layer height: 0.20mm
• Supports: no
• Perimeters: 3
• Elephant foot compensation: 0mm

Fuzzy Skin Tips:
You need to avoid the screw threads and apply Fuzzy Skin only to specific areas. This can be done by using a modifier region to limit where the effect is applied. For this model, you’ll need to define the region up to a height of 36 mm.

1. Load the model.
2. Select the model, right-click → Add Modifier → Box (or Cylinder, etc.). 

1. Adjust the created modifier region so it covers the area where you want to apply Fuzzy Skin.

1. With the modifier selected, enable Fuzzy Skin in the settings panel on the right.

Note:

• Please make sure to print the blade on smooth PEI. Textured PEI is not recommended.