Polydryer adaptor for Prusa Core One

I built this holder because I use Polydryer boxes and always had them placed next to the printer. Due to limited space, I wanted to integrate the box into the niche of the Prusa Core One. The design is made in a way that requires no support material.

I’m using 40 × 10 × 5 mm magnets, although the actual magnets are slightly smaller than specified, so I adjusted the slots accordingly (to 4.8 × 9.6 mm). There are probably more magnet slots than necessary, but since I don’t know how strong other magnets might be, I left them as is. 2 of my magnets are strong enough (for me)

The Polydryer box simply hangs into place.

And yes, the pictures show the Polybox on the wrong side of the Core One… I was still printing at the time.