Gardena hose holder V2

Originally designed for organizing a Gardena hose reel, they fit all approx. 20 mm pipes.

There are models for male and female couplings (and combinations) which fit better than holding the hose itself. While testing I found out, that even a tight fit for the male coupling (specially the nozzles) can not hold the parts while traveling. So I included a clip inside the m-holder (see section screenshot)

Model coding:

• f =   fits a female coupling
• m = fits a male coupling

The STEP file contains a raw model split into parts where you can create your own holder. Subtractors for screws (M4 x 20 mm) are also included, so you can adapt it to your needs.

To adopt it to other diameter pipes, you only have to build a new center part with your own diameter needed and add the male or female adapters.

Printing tips:

• PETG or better is recommended for stability
• no supports needed
• printed with 0.6 nozzle and 0.3 layers worked pretty well for me

Other parts needed

• 4 pcs. M4 x 20 mm (flat headed)
• 4 pcs. M4 nuts (self-locking recommended)