Spool holder width adjustable

Compatible spool dimensions

Min. diameter: 125mm, Min. inside width: 33.8mm, max. outside width: 103.2mm. 

Necessary (non-printed) parts

• 4x stainless steel 608 bearings.
• 8x M3 nuts
• 8x M3 bolts
• 1x M5x40-70 (use M5x70 for max. width. I used a M5x60 bolt)
• 1x M5 nut
• (Optional) Rubber feet with adhesive

Print instructions

It does not matter in what direction you print the side 1 part. There is a 0.2-0.3mm tolerance.
Print with 3 perimeters. I used 0.2mm layer height for al the parts, but 0.3 should also work.

The side parts I made are printed with Prusament PETG, but it could also be printed with PLA. Feel free to slice the part yourself if you wish to use other setting/printer models.