Micro SD holder for CMF Phone 2 Pro

Description:

So this model is made after the Official Universal Cover models for use with CMF Phone 2 Pro.

“The part is attached to the rear of CMF Phone 2 Pro with 4 M2 screws and our Accessory Point Cover (M2.5). Find device dimensions, screw sizes and more uploaded to support your creativity!”

Its main feature is the micro SD card holder on its back made after the original assembly design for easy printing with no supports and easy assembly after printing.

The card can hold up to 10 x Micro SD Cards in a compact way and easy to remove mechanism inspired by @scross01.

The Micro SD Card Holder comes with text or not if you do not like it.
 

* For now you can only store 10x Micro SD cards but i work on making other models for bigger SD cards or other cards, even debit and credit cards

Updates:
 

V1.2: 

• added a card holder with less material
• modified slicer settings for modified universal cover:                                                                                                                          Enable supports: False → True                                                                                                      Type: null → normal(auto)
• modified slicer settings for card holder insert:                                                                                                                                    Elephant foot compression: 0.15 mm → 0.25 mm
• also added a little bevel to the card holder and made the walls 1.5 mm

Recommended Print Settings:

            Modified Universal Cover

                  10.59 g   /  30 min 34 sec

Quality:

• Layer line: 0.16 mm
• Elephant foot compression: 0.15 mm

Strength:

• Sparse infill density: 15%
• Sparse infill pattern: Gyroid
• Wall Loops: 2 or 3 for more strength

Supports:

•       Needs supports
• Enable supports: True
• Type: normal(auto)

                                        Lens Insert

                                            0.62 g  /  4 min 48 sec

Quality:

• Layer line: 0.16 mm
• Elephant foot compression: 0.15 mm

Strength:

• Sparse infill density: 15%
• Sparse infill pattern: Gyroid
• Wall Loops: 2 or 3 for more strength

               Micro SD Cards Holder

                     6.92 g  /  25 min 21 sec       with text                          7.00 g  /  22 min 16 sec       no text

Quality:

• Layer line: 0.16 mm
• Elephant foot compression: 0.15 mm
• Ironing Type: Top Surfaces

Strength:

• Sparse infill density: 15%
• Sparse infill pattern: Rectilinear
• Wall Loops: 2 or 3 for more strength

          Card Holder Insert

                17.97 g  /  1 h 25 min             normal                         12.03 g  /  1 h 26 min            light

Quality:

• Layer line: 0.16 mm
• Elephant foot compression: 0.25 mm

Strength:

• Sparse infill density: 15%
• Sparse infill pattern: Gyroid
• Wall Loops: 2 or 3 for more strength

Assembly:

The assembly is very easy and practical, you just need to put the micro SD card holder in the Card holder insert then insert it and the Lens insert into the Modified Universal cover.

If the assembly is not very sturdy its no problem because the model is made after the original lens insert