November 5, 2025
Description
Cover up the ribs on the existing rock sliders with a slick plastic surface.
will reduce hang-ups and allow the vehicle to actually slide over sharp rocks.
Compatible with all versions of the SCX10iii.
use 4x M3 countersink head screws 8-10mm long.
Printing Instructions:
Material: Nylon, ABS, PETG (anything with good toughness)
Layerheight: 0.15-0.30mm
Walls: 1.2-1.8mm (3 to 4 Loops)
Infill: 40-50%
Support: Disabled
Orientation: As show below.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Jimjo
