May 31, 2025
Description
Two designs one for GPS Matek M10Q and Crossfire antenna mount in the back.
Important info about GPS!
Mount it is made low profile so You'll need to unsolder bottom connectors and solder wires directly to GPS.
Can also hold DJI O4 Pro antennas with proper silicon rubber.
I've changed antennas to TrueRC LHCP Omnidirectional (they have longer SMA cables).
Second design is for front mounted lidar sensor from Matek 3901-L0X.
For lidar You need 3mm hole in bottom frame to pass through wires.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Damian Mróz
