December 25, 2025
Description
After spending a considerable amount of money on these pop-up sprinklers and needing only the internals, I decided I had had enough.
I modeled the internal piece where the spray nozzle connects to your irrigation line. Please note that to ensure a 100% match, reuse the spring and other parts from your sprinkler.
Print with PETG, Nylon, or CF to handle the water pressure.
This was modeled after the Hunter Pop Up Sprinkler - 6 Inch Pro Spray. Threads match for all spray nozzle types.
V2 now has a thicker neck to ensure it's a bit stronger. If leaking from the threads, apply some Teflon tape for added strength.
Can't find a leak in your system? Check out the new Sprinkler cap added!
Threads:
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
BTCB
