The New Glenn model is a highly detailed 1:200 scale reproduction of the first orbital rocket of Blue Origin, which made its first flight on January 16, 2025.
The finished model dimensions are approximately 49 cm high and 8 cmwide.
Printing
There are 38 parts to print, the total printing time for the entire model is approximately 9 hours.
Choosing your configuration kit.
There are multiple configuration kits available for this model, depending on your printing and assembly preferences.
Project 3MF
For the first time I am adding a multiplate 3MF file.
Files (.Zip)
Kit with Fuzzy Skin (Full Rocket with fuzzy skin texture on the second stage)
Kit without Fuzzy Skin (Full Rocket without fuzzy skin texture on the second stage)
Stand Multi Parts (Stand for one color printer)
NEW GLENN or NG-1 plate
Stand Multi Color (Stand for Multi color printer)
NEW GLENN or NG-1 plate
Printing Guide
For Flap_Silver_x2 parts, you must use the Arachne generation.
Nameplate AMS
Nameplate can be printed with a multicolor system, but also with a color(M600) change at layer 14.
Tips
Settings
For infill, 15% is sufficient for a decorative object, and you can also use "Lightning" infill settings. .
For the base, it is recommended to print with 3 perimeters to avoid visible infill.
If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit.
Printing
For a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly.
Post Printing
You may need to sand the junction areas between the parts for a smoother finish.
I recommend using glue for better strength and durability.
Kmobrain - AstroDesign3D
