Jeep Wrangler Tie Downs

UPDATE 5/26
I recently upgraded from my 2015 Wrangler (white pictures) to a 2022 Wrangler (red pictures). The new one didn't have the same holes for the bolts. There are 3 threaded holes that take M8x 25 1.25 pitch bolts (I think. It could be 1.0 pitch. I can't remember.) I also had to get washers (see pictures) because the holes in the tie downs were too big in the old tie downs.

To make things easier, I made new versions with "--small hole" at the end of the file name for these smaller screws.

I also made a new length with "medium" in the file name. It is 50mm long. The long one is a little over 100mm long.

*****Print with TPU or flexible filament*****

Two size tie down anchor points. I attached them with ¾" bolts and Nylock nuts (with the nylon ring in one end of the nut). I attached the straps of the cargo net (as seen in the pictures), but I also use them for rope and bungee cords.