Pedestrian Safety Device aka The Brick

Inspired by Vision Zero Vancouver's campaign Grab a Brick! Now you can print your own personal brick to protect yourself while crossing streets!

Pictures at 100% and 25% scaled.

Print instructions:

• Printable in PLA;
  • For best results use Panchroma™ Marble PLA or a similarly coloured filament;
  • Alternatively, just paint after printing.
• Adaptive cubic infill 10%;
• Scale it up or down depending on your preferred brick size;
• 0.2 Speed preset on the Mini+ IS;
  • The bigger the layer height, the faster will print;
• Fuzzy skin on all surfaces.

Happy printing! If you print, please post a make.

Disclaimer: I won't be held responsible for any fights you get with drivers. Use at your own risk.