RAMA | Cutlery drip tray for kitchen rail

RAMA | Cutlery drip tray for kitchen rail

This is the cutlery drip tray, part of the RAMA collection of kitchen rail accessories. 
Perfect to leave your cutlery to dry. 

It has:

• 3 tall compartments on the back, for knives and forks etc.
• and 3 smaller ones on the front, for small spoons or vegetable peelers.

The collection includes:

• a FREE set of wall brackets for Ø18mm or 3/4inch wooden rails, plus hanging planters and hooks.

And the following accessories:

• a marackgnetic knife 
• a cookbook or ipad shelf
• a dishsoap and spong holder
• a drip tray to dry your cutlery
• a spice rack
• a towel holder

3D PRINT SETTINGS: 
All STL files are all already oriented properly. 
No need for supports, or brim.

The hangers print on their side and don't need support, even for the overhanging part.

You have to print 4 dividers: 2 big and 2 small ones. 
They simply slide into little grooves inside the rack.

The bottom plate of the rack will appear "full", this is not a mistake. 
You need to turn it into a "mesh" by selecting an infill pattern of your choice, and setting the top and bottom layers to 0. 
On the example on the pictures, I used a 20% honeycomb infill.

Layer height: 0.2mm/layer 
Wall line count: 2 
Top layers: 0 (to cancel top face) 
Bottom layers: 0 (to cancel bottom face) 
Infill: 15 to 20% (honeycomb on the pictures) 
Build adhesion type: None 
Supports: None