Winwing Orion 2 Throttle FingerLIFT mod.

Long handles are not compatible with the original idle detent. I've included some experimental idle detents, but they do not work with the stock spring. If i push the handles down manually they do stop the throttle from moving past idle, so stronger springs might make them work. Original springs: 0.5mm dia, 15mm lenght, 5mm width

Print orientation:


Print settings:
Walls - 5
Supports - on

For the detent, pick the lowest size that stops the throttle, so you can push through them with considerable force.


Some users had concerns about it and/or the polymer handles breaking, i couldn't get it to break, just respect the recommended print orientation.