Jeep Wrangler JL Dash Mount Phone Holder

Print in PETG for best durability results or order from my shop.

Based on the bullet point mounting solutions metal dash mount for 2024 Jeep Wrangler. 

50% infill minimum. Improvements are shown with higher infill. Highly recommended to print with PETG or PC or ABS to prevent wrapping due to temperature on the dash of a Jeep climbing. The ball of the mount is 1'' which compatible with most ram mounts.

Note: If you download the STL and load it into Prusa Slicer, make sure to have the scale factor set to 1 and not 100. Note there are multiple sets of models because the originally design had the sierra national park wrapped around the model. Apologies for any misunderstanding this must create. 

--------------
Brief update (June 23, 2025): With temperatures increasing significantly on the East coast of the US its been shown by early adopters that the dash of the Jeep can reach temperatures of around 160F. This can lead to increased deformation of balls so it is recommended to use 100% infill with PETG or use ASA or ABS for a slightly higher glass transition temperature.