January 4, 2025
Description
Have 2 versions. v6 requires heatset inserts and v2 just uses the screws to thread the part
The v6 also adds compatibility with a backplate made from the stock anet a8.
4 holes have been clearanced for the bolt heads so the adaptor can be removed without moving the bearing blocks or the belt
Non-printed hardware:
M3 ~25mm Screws, M3 Heatset Inserts, M3 Washers
Designed to be compatiable with
https://www.thingiverse.com/thing:1905344
Belt Holder Inspired By
https://www.thingiverse.com/thing:2425783
Adaptor Inspired By
https://www.thingiverse.com/thing:2099577
(Kinda remixed, I didnt take any dimensions from the above, I just looked at them)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
InducedRug
