Centauri Carbon Internal 1kg Spool Mount Kit

Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is moved out of the way to remove the spool/holder. The studs may be removed with a little effort. You will also need to have at least 8x 12mm M3 screws available to install the spacers. 

• Saves space - four printers to a 7 ft shelf instead of 3 
• Keeps hygroscopic filament dry while printing
• Pair with my Elegoo Centauri Carbon Side Panel Hinge Kit
• Improved spool holder: Elegoo Centauri Carbon Internal Spool Holder Gen2
• Deeper spacers available: Centauri Carbon 7.5 mm Panel Spacer 

I recommend printing these in ASA or PETG with 4 walls and 3D honeycomb infill at 8-10%.

See Uncle Jessy test the initial release of this recently improved kit here: