February 11, 2022
Description
I remixed this case, you have to use 3 M3x8mm (10 or 12) to secure the cover, it is sturdier than the little tabs from the original.
I also remade the wall support sturdier.
And I made a vertical and horizontal case.
Enjoy!
Printer:
Haribo home made
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
30 %
Filament:
Amz3d PLAWhite
Notes:
Use:
3x M3 x 8mm up to 15 mm long for the cover.1x M2 x 10mm for the pivot.
1x M6 x 25mm for the hinge.
1x M6 Nut.
License:
Creative Commons — Attribution
Bookaroo
