USBtingo 9-pole D-SUB case

This is a case for the great USBtingo CAN-FD Bus interface .

The interface PCB can be purchased from this page: https://www.fischl.de/usbtingo/

I like to use it professionally and privately and would like to protect it from mechanical damage.

The lid is in snap in design. I have used a piece of 1.75mm transparent Filament as a light diffusor to bring the light of the LED through the lid. The filament is glued to the lid using a drop of superglue.

Additional components required:

• 4 x Nuts M3
• 2 x cylinder head screws M3 x 5 mm
• 2 x flat head srews or special d-sub fastening screws to fix the 9-pole D-sub connector

Printed on a MK3-S+ using PETG with theese settings:

• Layer height 0.2mm
• 2 Perimeters, 15 % infill
• Organic support for the bottom
• Random seam position

Hope the model is useful for other makers.