Curtain Glide

A friend had trouble sourcing curtain glides for their forty year old boat, modern manufactured ones were somehow marginally wrong, so I made a new set for them.

Please check the dimensions to make sure they suit your purpose.

I have printed in both PLA and PETG and surprisingly both seem to be holding up well after six months of full time use.  I had anticipated using Prusament CF Blend for the final product but may wait to see if that's necessary.

The disk and support shown in black on the photographs is designed to simply snap off, no other support is necessary.  I printed with a 0..4mm nozzle and 0.15mm layer height, and the results have thus far been great.