Geometric Woman Head Sculpture

All my photos are REAL and show an actual 3D-printed figure photographed by me.
 

The texture effect visible in the photos is primarily caused by the Seam Position setting being set to "Random," and possibly also by filament that wasn’t completely dry. Either way, the result turned out very interesting.

[ Suggested Print Setup ]
Nozzle: 0.4mm
Layer Height: 0.15mm ( You can adjust the layer height based on how much detail you want ) 
Seam Position: Random
Infill: 10%
Wall loops: 3
Supports: Tree (auto)
Printed with: Bambu Lab PLA Matte White
 

Printed with fuzzy skin effect. 

Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.15
Fuzzy Skin thickness: 0.15
 

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.