Custom Side Panels for Printable 10" Server Rack

I created side panels for the printable 10 inch server rack that are mounted on the back of the frame.

The panels were designed without any tolerances. Some X-Y compensation to lower the size is recommended.

I used additionally a little bit of double sided tape to secure the panel.

The mesh is created by setting the top and bottom shell layers to 0. I used rectilinear infill at 35% with 4 walls.

It is the same technique as here: https://www.printables.com/model/1138361-pc-fan-dust-filters

Print at least
2x Top & Bottom
2x Top & Bottom Mirrored

The 1U version is untested but should work.

No idea if they fits any other 10" rack since it was made for https://www.printables.com/model/358304-fully-printable-half-width-server-rack-and-trays and the holes aren't centered.