February 11, 2022
Description
This quick-printing spring clip is designed for 8mm dia, x 3mm thick magnets (Master Magnetics #07045) commonly available from hardware stores.
Printer Brand:
MakerGear
Printer:
M2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Set your line width to 0.4mm for best results.
The magnets should press firmly into place on the back of the clip. If the fit is too tight, scale the clip up by 1 or 2%.
Category: OrganizationLicense:
Creative Commons — Attribution — Share Alike
LoboCNC
