NESIT Logo Keychain

10/07/16 - New for the 2016 Greater Hartford Mini Maker Faire is an update to the original design. Some of the thinner areas were fleshed out for better printing and the default size was decreased to 2mm thick for quick promo-item prints.

You're looking at the official NESIT Sans logo in sexy key-chain fob form. Standard is 5mm and the 3mm one is. Well. 3mm.

The font was designed by Pat (you've seen his brilliant work) specifically for our logo and we've used his awesome contribution ever since.

This keychain itself is a rework of the original found otherwhere on Thingiverse when I realized it didn't work correctly and had some manifold issues. This one doesn't.

Print instructions

Category: Keychains Print Settings

Rafts: Doesn't Matter

Supports: No

Resolution: .2mm

Infill: 20%

Notes:

These settings were used as a homing/test print on the CTC Replicator. Seem to work okay on there with WYZ's green filament. Your mileage may vary.

How I Designed This

This design was cleaned up by importing the original into Sketchup then (painstakingly) removing all the junk and making sure everything was manifold. Then creating a new STL file which you see before you.