HTD 5M pulley for 1108 taper lock bush - NOT TESTED in use

NOT TESTED YET/ loaded in use - belt fits

Pulley with HTD profile for 5M 20mm belt, separated in two parts for easy printing.

Model was printed from black ABS, little bit sanded, glued and bolted together by M4 x 35 BHC screws, 4.3 x 20 x 1.25 mm washers were used under screw heads and under nuts.

I am publishing the model yet, mainly because I have not found a similar combination. In my planned application, the pulley will continuously transmit a maximum of 40 W of power