July 15, 2025
Description
No longer current, version 1.6 of the “press fit” versions replace the “glue” versions, see table below:
| smthng display housing 1 (press fit) | smthng display housing 1 (press fit and back clip) | OUTDATED smthng display housing 1 (glue edition) | smthng display housing 2 (with frame) |
|---|---|---|---|
|
|
|
|
| https://www.printables.com/model/1316664-smthng-display-housing-1-press-fit-for-gaggimate | https://www.printables.com/model/1329574-smthng-display-housing-1-press-fit-and-back-clip-f | https://www.printables.com/model/1325292-smthng-display-housing-1-glue-edition-for-gaggimat | https://www.printables.com/model/1325639-smthng-display-housing-2-with-frame-for-gaggimate |
I recommend using double-sided adhesive tape and only sticking it to the thicker areas (as shown in the picture). This is enough to hold the display in place, but you can also carefully remove it again due to the small amount of adhesive.
Align the display as centrally as possible during installation.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
modsmthng
